Customer Support

Digital counter trapped in X state

admin 12/11/2015 0

I built a counter in Micro-Cap using JK flip-flops with both the J and K inputs set to 1 so that the output will toggle with the active clock edge. Wh...

.IC statement not setting a voltage across an inductor

admin 12/11/2015 0

I have used a .IC statement to set a voltage across an inductor, but when I run transient analysis, the results are different than what I set. In...

How to measure impedance

admin 12/11/2015 0

How do I plot the input or output impedance of my circuit in AC analysis? The input and output impedance of the circuit must be plotted in an ind...

FFT, FFTS, and HARM operator differences

admin 12/11/2015 0

I am interested in performing some Fourier analysis simulations on my circuit. In looking through the manual, I have noticed that there appear to be t...